Perfect Granite Solutions introduces our newest service for the stone and construction industry, Dustless Blasting. PGS Blasting uses an abrasive media, mostly recycled glass, with pressurized water vapor. This combination reduces the amount of dust in the air allowing us to remove all kinds of coatings. Such as rust, adhesives and paint on multiple services  such as stone, brick, cement and wood.


We can help you with your next project!

We can produce non-slip surfaces on pool decking and walk ways, remove graffiti from walls, remove ocean contaminants off docks, blast rust off from railing and steel fixtures, restore wood decking and railings to stripping off paint from buildings.


All with a limited amount of dust and an eco-friendly approach.


This stucco wall needed approximately 3/8ths of the existing stucco removed for a smooth coat finish and our blaster got the job done.

Removing three layers of paint from a cinder block wall using PGS Blasting. This method saved days of hard labor, hand grinding the paint and removed nearly 100% of the paint embedded in the holes.


White Marble Fountain Restoration


Compare the top half stained and soiled to the lower half white and clean. PGS Blasting completely restored this White Marble Fountain. For several years previously traditional methods were used with little effect. View the video below to see PGS Blasting in action.


Call us to restore marble or concrete fountains.

Restoring an aged fountain located in Upland, California using our Dustless Blasting methods.
QuickTime Video Format 34.7 MB

In this project the homeowner picked a Quartzite stone cladding with a taupe/gray color. After it was perfectly installed there were several gold colored pieces. This was not good at all. After the installer tried several methods to remove the natural iron oxide, he called PGS. Using our Dustless Blasting  system we removed a majority of the gold color! See the photos below for the before and afters.